Mobil B-61 Geotechnical Drilling at Tanana Bridge Site

Geotechnical/Environmental Drills

  • Mobil Drills
    • Mobil B-61 (8)
  • CME Drills
    • CME 45 (3)
    • CME 55 (3)
    • CME 75 (3)
    • CME 85
    • CME 850
  • Geoprobe 6610
  • Georex (2)
  • Technodrill
  • Backpack Drill (3)
  • Minute Man Drill (3)

These drills are used for geotechnical drilling, which includes: solid or hollow stem auger drilling, split spoon sampling, shelby sampling, piston sampling, BQ,NQ, HQ and PQ diamond rock coring and air or mud rotary drilling. They are also used for drilling and sampling of environmental test borings and the installation of monitoring wells (2" to 8" diameter pvc), vapor extraction probes/wells, injection wells and small diameter (2" to 6") water wells. The drills can be mounted on a variety of carriers: trucks, tracks, Rollagons, skids, or configured for helicopter slinging and the smaller drills can be moved with small atvs.



Texoma 600 Drill, Tower Foundation Construction at Kenai

Deep Shaft Auger Drills

  • Texoma 600
  • IMT AF-80
  • Yutong 120



These units are used for pre-drilling , drilling out and rock socketing for large diameter pipe piling installations. They are also used for drilling elevator shafts, soldier piles, tie back systems, thermo piles, de-watering wells, vapor extraction wells in landfills, and the drilling and installation of large diameter (7' max.) shafts for power pole, signs and tower foundations.




Schramm T660 Rotary Drill Geothermal Drilling at Juneau

Air Rotary/Percussion & Sonic Drills

  • Schramm T64
  • Schramm T660H
  • Sonic 550
  • Geotechnical Drills (29)



These drills are used for water wells, deep environmental wells, cathodic protection wells, and relief holes for large driven piles in rock.

All our drills can be converted to use air rotary drilling methods and percussion tooling. Our Schramms are setup with onboard air compressors and can be boosted with additional air compressors for drilling large diameter holes. The Schramms also have drill through casing hammers for the installation of waterwells (6"-18" diameter).

The Sonic 550 drill can be used for all rotary drilling operations, including rota sonic drilling and core sampling (3", 4" & 6" samples) for mineral exploration, drilling/casing for soldier piling, tiebacks and whalers and the drilling and installation of water or environmental wells.



CME-45 Heli-drill Geotechnical Drilling at Hurrican Gulch

Helicopter Drills


We have customized our Mobil B-61, CME-75/55/45 and Geoprobe 6610 geotechnical drills to be heli-portable using heavy lift Bell UH-1 (3800# lift capacity) helicopters. Our CME-45s, Geoprobe 6610 and Technodrill can be lifted using A-Star B-350 (2500# lift capacity) helicopters. Our Backpack drills (breaks down to 200# loads), Mobil Minute Man and Cobra drills can be lifed using Lama (1200# lift capacity), Bell Jet Ranger (700# lift capacity) or Robinson R-44 (700# lift capacity) helicopters.



Housing Pile Foundation in Remote Alaska Village

Pile Drivers

  • MKT 5 Air Hammer
  • MKT 6 Air Hammer
  • MKT 7 Air Hammer
  • Trimac Hydraulic BRH750
  • Atlas 2000 Hydraulic Hammer
  • Wellen 1262 Air Hammer

DDI has been driving small pipe piling (2" to 16" diameter) for building foundations throughout Alaska since 1970. We also have constructed steel buildings and pole barns on steel pile foundations. We have custom pile driving equipment that can be transported by C-130 Hercules aircraft for large piling or for small piling a Cessna 207.


CME-75 Drill Geotechnical Drilling at Hoonah

Offshore Operations


DDI is the leader in offshore drilling in Alaska completing over 200 offshore projects statewide. We are experienced at assembling and operating safe, affordable offshore operations. Throughout the coastal cities and villages or in major lakes and rivers, we have been drilling and sampling for geotechnical, environmental, or mineral exploration. For docks and harbor construction we have assisted with all aspects of contsruction, including pile driving, rock socketing, coffer dam construction, and vibro-compaction. Since 1970 we have had the pleasure to work with local people in these communities to team together and use local resources when possible, (LCMs, Boats, Barges) as safe platforms for our drilling operations. This allows for savings on mobilization and demobilization costs and connects us to the local community in a positive way.